10AWT

1. It is important that prior to installing Well Seal to be sure to inspect the well head making sure it is clean, and the well cap is properly secured, and all fasteners are tightened.

2. Unfold the Well Seal, and smooth the two folded areas
*Note when installing the Well Seal at below 40 degrees F, it must be at room temperature (70 to 80 degrees F) prior to installation to allow for pliability.

3. Slide Well Seal over the well cap and well casting until approximately 1 inch remains above the well cap. Orient the printing, such as a company logo, to allow for maximum visibility,

4. Starting from the top, and away from the printed area, apply heat evenly, working down and around in both directions toward the printed area. Continue to heat until in conforms to the shape of the well head.