The WellSeal Heat Gun!
$74.95
WellSeal HG-400 Heat Gun
The HG-400 provides heat up to 1,022 degrees F.s
This Hotair Gun is cordless, doesn’t have a battery, features an automatic ignition and uses a long-lasting propane cylinder. This heat gun will work for many applications including thawing frozen pipes, locks, heat shrink tubing and more. This tool comes complete with deflector and spreader nozzles, bottle is not included.
1. It is important that prior to installing Well Seal to be sure to inspect the well head making sure it is clean, and the well cap is properly secured, and all fasteners are tightened.
2. Unfold the Well Seal, and smooth the two folded areas
*Note when installing the Well Seal at below 40 degrees F, it must be at room temperature (70 to 80 degrees F) prior to installation to allow for pliability.
3. Slide Well Seal over the well cap and well casting until approximately 1 inch remains above the well cap. Orient the printing, such as a company logo, to allow for maximum visibility,
4. Starting from the top, and away from the printed area, apply heat evenly, working down and around in both directions toward the printed area. Continue to heat until in conforms to the shape of the well head.
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 4 × 4 × 12 in |